Vacuum Stacker

Vacuum Stacker is achieved via vacuum suction, which maximizes surface quality. It is especially suitable for the production of strips requiring high surface finish standards and effectively prevents surface scratches. The interlayer misalignment is less than 0.5 mm, ensuring neat and aesthetically pleasing stacking. Compared with traditional air cushion and mechanical stacking systems, this technology boasts distinct advantages and broader applicability, working equally well with both thin and thick sheets.

• The control panel of the vacuum stacking device features a touchscreen that displays stacking speed and quantity for easy operation.
• The vacuum stacking system can operate normally even when paper or film is attached to the metal surface.
• Handling of head and tail scrap is hassle-free, as the waste is automatically collected into dedicated bins.
• It is equipped with a three-stage buffer system to minimize damage to the leading edge of the sheet.
• The stacking speed has a wide range, from 10 m/min to 150 m/min.
• It can be configured as a dual-stacker to enable continuous production during stack switching.
• It is suitable for materials with a broad thickness range, from 0.1 mm to 10 mm.